DSC-TGA analysis system

Setaram

LabSys Evo TG-DTA/DSC with MFC + DSC131 EVO

Materials characterization

With LABSYS evo STA 1600 it is possible to analyse samples at temperatures as high as 1600 °C. It is used to understand the thermal behaviour of materials that are exposed to extreme temperatures during their production, service, or recycling. The tool is used for the determination of the sintering temperatures of metal powders, determine transition temperature of the glasses and crystallization temperature of composite in composite materials such as glass ceramics and other thermal characteristics of all sorts of organic and inorganic materials.

Temperature Range:

• sensor 1: room temperature to 800 °C
• sensor 2: room temperature to 1 600 °C

 

Isothermal temperature accuracy: +/- 1 °C

 

Programmable temperature scanning rate (heating and cooling): 0.01 to 100 °C.min-1

 

Furnace cooling:

• 30 min (1150 °C to 50 °C)
• 32 min (1 600 °C to 50 °C)

 

Maximum balance capacity: 20 g

DSC rod – Resolution: 0.4 μW / 10 μW dependent on sensor

3D Cp rod – Cp Accuracy: < 2 %,

Vacuum: < 10-1 mbar

 

Evolved Gas Analysis

MS, FTIR, GC/MS coupling

Gas Flow Control         

Two inlets for gas scanning (inert or reactive)

Option: 3 carrier gases (MFC from 4 to 200 ml/min) and 1 auxiliary or reactive gas (MFC from 0.3 to 16 ml/min)